Brand Name : LuoLe
Certification : CE
Place of Origin : Wuxi
MOQ : 1 set
Price : discuss in letter
Payment Terms : T/T
Packaging Details : with bubble paper
Working Speed : 12 Meters / Min
Forming station : 20
15KW Z & C Purlin Roll Forming Machine With Hydraulic / Manual Decoiler and Siemens PLC Automatic Control Whole Line
Machine overview
C and Z steel purlins are necessary for the modern steel industrial buildings, and some residential building as well, and various kinds of c/z purlin roll forming machines have been developed to produce C/Z/U steel purlins.
In accordance with different requests for C and Z steel purlins, in the markets there are c purlin roll forming machines for the production of C steel sectional channels, z purin roll forming machines for the manufacturing of Z shaped channels and interchangeable c/z purlin roll forming machines which are designed to produce both C and Z steel purlins without replacing any rolling tools or cutting dies.
Simple introduction of this machine
Details of Z purlin roll forming machine
Item | Description |
Material of roller : | GCr15,quenched |
Material of shaft : | 45#forge steel |
Material of punching mold : | Cr12 HRC 58-62 |
Material of cutting blade : | CR12with heat treatment |
Main power : | 15KW |
Hydraulic power : | 7.5KW |
Working speed : | 15m/min(not include cutting and punching) |
Forming stations : | 18 stations |
Control system : | PLC Panasonic |
Transmission : | By gearbox |
Automaticity : | Semi-Automatic/Automatic |
Main dimension(L,W,H) : | 11000mm*1400mm*1400mm |
Total weight : | 14000KG |
Main parts of Z purlin roll forming machine
NO. | Name | Unit | Qty |
1 | Roll Forming Main Machine | Set | 1 |
2 | Hydraulic/Manual decoiler | Set | 1 |
3 | PLC Control System | Set | 1 |
4 | Hydraulic Punching Device | Set | 1 |
5 | Hydraulic Cutting Device | Set | 1 |
6 | Hydraulic Station | Set | 1 |
7 | Manual Out Table | Set | 2 |
Details of main parts
Name | Describe |
Control panel (PLC Panasonic) | The machine will automatically cut to length and stop when requiredquantity is achieved. |
Control panel:button-type switch and touch screen | |
The program should be can set 5 different measure and quantity. | |
Tolerance of length: 3m+/- 1.5mm | |
Voltage,Frequency,phase:415V,50HZ,3Phase | |
Punching and cutting device | Punching with hydraulic drive |
Punching in longitude wise controlled by PLC | |
Punching at horizontal wise adjusted by manual hand wheel | |
Hydraulic Cutting before forming: Cut the sheet before roll forming to required length. | |
Cutting motion: The main machine automatically doesn't stop and the continue punching and cutting. | |
Hydraulic decoiler
| Hydraulic coiler car adopt motor advance (power:3KW, hydraulic up and down:12MPA) |
Single head to put the coil hydraulic flow over device. | |
Coil spec:Φ508×1300mm | |
Flow over range:Φ460-520mm | |
Oil cylinder:Φ160×90mm | |
Transmission:drive by hydraulic brake | |
Load bearing:5T,10T,20T |
15KW Z & C Purlin Roll Forming Machine With Hydraulic / Manual Decoiler And PLC Control Line Images |